1965-1982 BRAKE PADS ANTI SQUEAK KIT – SET OF 8

Description

1965-1982 Corvette Brake Anti-Squeak plastic shims are inserted onto the trailing edge of each brake pad to stabilize the pad in the caliper, preventing vibration and squeaks.

Installation instructions: To install without removing the brakes, rock the pad up and down while still inside the caliper.
Slide (force) the sleeve down along the trailing edge of each pad as far as possible.
Trim off the excess.

Note: If the noise persists, move the sleeve from the rear edge to the front edge. You can also place sleeves on both edges.